Bathroom remodeling is an expensive process. The labor and the cost of materials add up to make a hefty total. However, there are various bathroom remodeling projects you can do yourself and save the cost of hiring a contractor. So, below are the bathroom upgrades homeowners can DIY.

Painting The Walls And Ceiling

Painting the bathroom walls and ceiling is an easy and rewarding update. Bathrooms are the most moist room of any house so painting this room is different than painting other rooms. You will need to use specialized paint to avoid mold growth and moisture damage. So, choosing the correct type of paint for your bathroom walls and ceiling is essential.

Keep in mind you should use paints with a glossy finish because they are resistant to moisture and stop water from entering the walls. If you select flat or eggshell paints, they will absorb moisture and penetrate into the drywall.

Moreover, never choose masonry paints. Even though they are waterproof because they are made for painting the external parts of the house, they contain chemicals that can cause respiratory problems if used indoors.

Lastly, don’t forget to apply a primer before applying the paint. This will allow the paint to bond well to the wall and avoid peeling.

Replace The Faucets And Showerhead

We know replacing a toilet or bathtub is costly. If your toilet, bathtub, sink, and other fixtures are not too old and serve you well, you can only change the faucets, showerheads, and other things to change the appearance of your bathroom.

When choosing faucets, try to select those that have the same features. For instance; don’t try to install two-handle faucet in place of a single-handle faucet. If you don’t want the faucet to trip, select a faucet that has ceramic valves. The best part is that they are not costly.

For the showerhead, you can go with a fixed, handheld, rainfall, or dual showerhead. Fixed and handheld shower heads are the most common, so you won’t have any issue replacing them with a newer design that has more shower or better shower patterns.

Paint The Cabinets

You can revamp the color of your vanity cabinets with a few days of work and make the space appear fresh. For painting the cabinets, you should use a primer that is required for the type of cabinet material you have (wood, laminate, etc.).

Just as with the paint for the walls of your bathroom, you should also look for paints that are resistant to moisture and grime for your vanity cabinets. So, use high-gloss paints that are considered better for bathrooms and they also make the surface easier to clean.

For painting the cabinets, you will need to remove the hardware from the cabinets. If you want to change the hardware as well, read the next point in this list.

Start with cleaning and sanding the cabinets. And when you’re set to apply the primer and the paint, perform a test paint and prime first. It will help you to ensure that the color is what you have in mind.

Replace The Cabinet Hardware And Bathroom Accessories

To ensure a better impression, you should also replace the hardware of the cabinets before painting them. They are easy to replace and don’t cost much. You get a new look at a cheap price.

The new hardware should have the same size and the screw alignments as the old so you don’t have to put too much effort into installation. You will still be able to find many designs with that limitation.

Moreover, don’t ignore other accessories and hardware in your bathroom like shower hooks, shower rods, towel racks, drawer pulls, mirror frames, shower handles, and others. These small changes will make a big impact on the overall appearance of your bathroom.

If you needed a bathroom accessory that you didn’t have, this is the time to buy it and install it in the area. This will also increase the functionality of the bathroom for you.

Refinish Your Bathtub

Bathtubs are costly and on top of that, they require an expert for installation. If your bathtub is in good condition structurally and has cosmetic issues like a yellowed surface and small cracks, you can refinish it to make it look like new at a fraction of the cost of a new bathtub. Plus, refinishing a bathtub takes about 3-5 hours. You will have it ready to use in 24 hours.

You can find various bath finishing options that you can easily apply yourself. Make sure to follow the instructions like remove the hardware, clean the tub, remove the existing glaze, sand the tub surface, prime the surface if the kit has it, apply the glaze application, and then epoxy coating.

Don’t use any other primer than the one included in the kit. Avoid a paint primer because it’s not for bathtubs.

Touch-Up The Bathtub

Refinishing a bathtub is a cost-effective method of renewing your yellowing bathtub. However, if you want a simpler and easier solution than refinishing, you can go with a tub touch-up. In a touch-tub, you won’t be redoing the entire surface of the bathtub, instead, you will spot-fix the bathtub where needed.

Paint Your Wooden Floor

Bathrooms with wooden floors may appear beautiful, but they are high-maintenance and not suggested for bathrooms. It would be in your best interest to replace the wooden flooring with a moisture-resistant option like tiles or luxury vinyl plank.

However, if you don’t want to spend on replacing the bathroom flooring or like the wooden floors, you should look into painting the flooring. This will make your bathroom flooring waterproof. You may have to paint it every few years to keep it water-resistant.

Change Light Fixtures

Replacing old light fixtures with new and better light fixtures is easy and fun. You can choose options that offer all-around light coverage. Many modern light fixtures have brightness levels and various lights to match your needs or mood. This also enables you to change the appearance of the bathroom by simply changing the light color and brightness.

Moreover, you should also have a central lighting fixture that can make the space appear luxurious and add a sense of style. The types, designs, and options for light fixtures are almost infinite, so check out different options to choose the best ones for you.

Wainscoting

If your bathroom walls are plain, you can give them more character and dimension by wainscoting the bottom half of the walls. Moreover, it can also hide holes and small cracks in walls. Also, it protects the walls of your bathroom and also acts as insulation.

Moreover, wainscoting is not only made of hardwood. You can choose wainscoting made with plywood, MDF (medium-density fiberboard), or plastic. For bathroom walls, you should rely on MDF and plastic wainscoting.

Change The Shower Curtain

Transforming your bathroom can be as easy as hanging a new shower curtain. Go for a textured shower curtain if you don’t like a plain white curtain.

Conclusion

There are many ways to improve the appearance of your bathroom without going through a costly remodel. However, if you have leaks, cracks, mold, safety issues, or any other major problems, consult bathroom remodeling contractors Silver Spring for fixing these issues with a remodel.